Uei-test-instruments EM201SPKIT Manual do Utilizador descarregar pdf (Página 5)

OPERATING INSTRUCTIONS

1. Zero the meter

Priortouse,themetermustbezeroed.Todothis,ensurethe

meterisinanon-pressurizedarea,andpressandholdthe

‘ZERO’buttonforapproximatelyfourseconds.Thedisplaywill

show‘888’toindicatethatthezerofunctionhasoccurred.

2. Measure Pressure

Connecttheflexibletubebetweenthemeterandthe

pressuresource.

TheEM201’spositiveinputistotherightwhenlookingatthe

frontoftheinstrument.Applyingapositivepressuretothis

portwilldisplayapositivereading.Theinputtotheleftisthe

negativeport.(Applyingapositivepressureherewilldisplaya

positivereading).Useeitherinputtomeasureasinglesource

byventingtheunusedinputtoatmosphere.Theinstrumentwill

continuallyprovideadifferentialreadingofthetwoinputs.

1 2 3 4 5 6 7 8 9 10 11 12

Sem comentários

Uei-test-instruments EM201SPKIT Manual do Utilizador Página 5