UEi Test Instruments FINE341 Manual do Proprietário

1-800-547-5740 • Fax: (503) 643-6322www.ueitest.com • email: [email protected] Temperature LoggerINSTRUCTION MANUAL

4. If you selected a user-defined logging interval (1 second to 23 hours and 59 minutes).• Press “ “ or “ “ until the display shows “h:m”

Resetting the ThermometerIf you want to retore the thermometer settings as delivered from thefactory, press “ “ or “ “ until the display

Holding the Displayed Temperature1. Press “ “ momentarily to freeze the readings on the display. The display shows “ HOLD “.2. Press “ “ m

Using the Offset to Compensate for Probe ErrorsUse the offset option in “SETUP” to adjust temperature readings tocompensate for the errors of a specif

Starting and Stopping LoggingMemory clear, and PC communications are in accessible during logging.Recall function is enabled during logging.1. Set the

5. Press “ “ momentarily or turn off the thermometer to stop viewing logged readings.NOTE: The thermometer calculates the minimum and maximum of

These guidelines will help you attain long and reliable service from your meter:1. Calibrate your meter annually to ensure it meets original performa

Battery ReplacementAlways use a fresh replacement battery of the specified size and type.Immediately remove the old or weak battery from the meter and

16SpecificationsEnvironmentalGeneralOperating Temperature 14˚ to 122˚F (-10˚ to 50˚C)Storage Temperature -40˚ to 140˚F (-40˚ to 60˚C)Humidity Non cond

TP6K K-Type Bead Thermocouple (a standard accessory)Electrical17Type K-Type, Chromel Alumel, bead styleTemperature range -40˚ to +900˚F (-40˚ to +480˚

TABLE OF CONTENTSIntroduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1Safety . . . . . . . . . . . . . . .

DT304Digital Temperature LoggerLimited WarrantyThe DT304 is warranted to be free from defects in materials andworkmanship for a period of five years f

IntroductionThe DT304Features include• IP67 Water/Dustproof rating• Large Backlit Multi paramater display• Convenient Probe Storage• Accepts J,K,T and

2Controls and Indicators1. Thermocouple T1, T2, T3 and T4 inputs2. Display3. Buttons4. USB jack213(top view)4

LCD Display Functional Description1. Primary Display: T1/T2 or T3/T42. TYPE KJET: Type of thermocouple.3.SETUP: Setup is in progress.4. RECALL: The lo

ButtonsNOTE: Press all the dual function buttons momentarily to activate theUpper Row Function ,and press these buttons for more than 1 secondto activ

Press this button momentarily to recall or stop viewinglogged readings and MIN/MAX readings. Press this buttonfor more than 1 second to start or exit

Setting the Date1. Entering Setup will show the first option of “ “2. Press “ENTER” and the display will show “ “3. Press “ “ or “

Changing the Auto-Power-Off Time (in minutes)The thermometer enters Auto-Power-Off mode if no button is pressedfor 30 minutes. Press “ “ to turn